Cutterbar mowers for intensive use
140
Configured for a centrally mounted cutterbar, this lightweight and easy-to-handle machine was designed to satisfy the needs of semi-professional users. It is used mainly for cutting grass and forage crops and for field cleaning. Details including the height-adjustable handlebars, rapid forward/reverse shuttle, Quickfit system and optional oil-bath transmission all demonstrate the close attention paid to operator comfort and safety.
- Gearbox 7-speed (4 forward + 3 reverse)
- Differential no
- Fwd/Rev shuttle yes, control lever on handlebar
| Power supply | Engine | Model | Displacement | Power* | Starting | Notes | Code |
|---|---|---|---|---|---|---|---|
| GX 160 OHV | 163 cm³ | 4.8 HP | recoil start | 68919051X5 | |||
| K 900 H OHV | 252 cm³ | 7.0 HP | recoil start | 68919005X5 | |||
| GX 270 OHV | 270 cm³ | 8.4 HP | recoil start | 68919055X5 | |||
| CH 395 OHV | 277 cm³ | 9.5 HP | recoil start | 68919059X5 | |||
| K 7000 HD | 349 cm³ | 6.7 HP | recoil start |
as standard with ballast for oil-immersed drive |
68919012X5 |
* Engine power data refers to the values declared by each manufacturer. These values are calculated in accordance with specific measurement standards (such as SAE J1940, SAE J1349, ISO 1585) and may be modified without prior notice.
SHARE
Technical features
| 1 | 1.05 |
| 1R | 1.11 |
| 2 | 2.20 |
| 2R | 2.32 |
| 3 | 3.63 |
| 3R | 3.83 |
| 4 | 11.38 |
| L1 | 1660 (1665) |
| L2 | 900 (950) |
| L3 | 760 |
| H1 | 1250-400 |
| W1 | 950-1450 |
| W2 | 437 |
BUY THEM TOGETHER
Data and illustrations published are not binding where specifications of materials are concerned, given that these will always be subject to technical improvement. Technical specifications given are subject to change without notice, as also are directions relating to general use of the equipment. Certain items are not available in all countries, or are available only on request.
